Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario descargar pdf (Pagina 51)

BCM 5.0 configuration with Business Element Manager 51

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

The Date and Time panel appears.

2 In the Current Date and Time panel, configure the Date and Time attributes.

--End--

Variable definitions

Configuring DHCP server settings

Configure the DHCP server settings on your BCM main unit or on the

integrated router.

Prerequisites

• If you have a main unit with an integrated router, you must first disable the

DHCP server on the integrated router to use the DHCP server on the main

unit.

Variable Value

Date and Time source Set to NTP if the system uses a network server to determine

the correct time and date.

Set to Trunk to receive time and date settings from PSTN (if

available).

Set to Manual to manually configure the time and date for your

system.

NTP server address If Date and Time source is set to NTP, enter an address for the

server.

Synch every (s) The number of seconds specified to elapse between contacts

with the NTP server.

1-XXXX: Number of seconds between contacts with the NTP

server.

NTP security mode Select whether the NTP security mode is secured or

unsecured.

Raise alarm if clock differs by at least

(s)

The number of discrepancy seconds specified that must occur

before the system notifies you of a time difference from the

NTP server, if the system automatically checks with the NTP

server.

NTP key ID ID for accessing the NTP.

NTP key string Control key corresponding to ID for accessing the NTP.

Date and time Use the calendar to select the correct date and time.

Time zone Select the time zone for this system.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 223 224

Sin comentarios

Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario Pagina 51