Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario descargar pdf (Pagina 61)

BCM 5.0 configuration with Business Element Manager 61

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

--End--

Variable definitions

Viewing and modifying SNMP trap destinations

Once you have configured SNMP settings, you can view and administer

SNMP trap destinations.

Attention: You can configure and administer SNMP trap destinations in

both the Configuration tab and the Administration tab of the Business

Element Manager. This allows operators who manage BCM 5.0 faults to

configure SNMP trap destinations without having to access the SNMP

settings on the Configuration panel. SNMP must be enabled on the SNMP

General panel if you want to configure and use SNMP trap destinations from

the SNMP Trap Destinations panel on Administration panel.

Procedure steps

Step Action

1 Select Configuration > Administrator Access > SNMP.

2 Select the SNMP Trap Destinations tab.

The SNMP Trap Destinations tab appears.

3 In the Trap Destinations table, select a trap destination.

4 Click Modify.

The Add Trap Destinations dialog box appears.

5 Configure the Modify Trap Destinations attributes.

6 Click OK.

Variable Value

Name Enter a name for the trap.

Host Enter the IP address of the trap destination.

Port Enter the UDP port number from which the trap will be sent.

The default value is 162.

SNMP version Select the version of the SNMP Agent for the trap. Options are:

v1/v2C, and v3.

Community String Enter the community string to use for the SNMP trap.

User Name For v3 only, enter the user name for the SNMP trap.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 223 224

Sin comentarios

Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario Pagina 61