Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario descargar pdf (Pagina 42)

42 BCM 5.0 configuration with Telset Administration

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

Prerequisites

• For more information about modem configuration, see Configuration—

Telephony (NN40170-502).

Procedure steps

Step Action

1 Select Feature 9*8 from a two-line display telephone.

2 Enter the following user ID and password:

• User ID: SETNNA

• Password: CONFIG

The numerical values of the user ID and password are 738662 and 266344,

respectively.

3 Press OK.

4 Press NEXT to scroll through the menu and select Modem.

5 Press OK. The display screen shows whether the modem is enabled or

disabled.

6 If the modem is disabled, press ENL to enable the modem.

7 If the modem is enabled, press DIS to disable the modem.

--End--

Selecting the region

Set the Region using Feature **PROFILE from a two-line display telephone.

For more information about using Telset Administration to set parameters, see

the Telset Administration Guide (NN40170-604).

Selecting the telephony startup template and start DN

Set the DID or PBX template and Start DN using Feature **STARTUP from a

two-line display telephone.

This is available for only 15 minutes after the system starts.

For more information about using Telset Administration to set parameters, see

the Telset Administration Guide (NN40170-604).

Initializing voice mail

Initialize your voice-mail system using Feature 983 from a two-line display

telephone.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 223 224

Sin comentarios

Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario Pagina 42