Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario descargar pdf (Pagina 56)

56 BCM 5.0 configuration with Business Element Manager

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

--End--

Variable definitions

Configuring the SNMP manager list

Configure the SNMP manager list by specifying one or more manager IP

address.

Prerequisites

• Use the SNMP manager list to specify IP addresses that can connect to

the SNMP agent.

Procedure steps

Step Action

1 Select Configuration > Administrator Access > SNMP.

2 Select the General tab.

It is normally selected by default.

3 In the SNMP Manager List area, click Add.

The Add Manager dialog box appears.

4 In the Manager IP Address box, enter the IP address.

The IP address must correspond to the PC where the SNMP manager

software is installed. Do not use the dynamic IP address that the PC

receives when the dial-up link activates (when the BCM 5.0 initiates dialing).

Using the dynamic IP address causes the removal of the required static

route. The format for the IP address is X.X.X.X:P, where P is the port.Setting

the IP address to 0.0.0.0 authorizes all SNMP managers to query the

system.

5 Click OK.

Variable Value

Enable SNMP Agent Choose whether to enable or disable the SNMP agent by

selecting (or not selecting) the check box.

Minimum required security Select the minimum required security for SNMP from the

list.Options are: noAuthNoPriv or authNoPriv

SNMP Version Support Select the SMNP version support from the list. Options are:

V1-V2-V3

V2-V1

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 223 224

Sin comentarios

Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario Pagina 56