
100 Dial-up resources configuration
Nortel Business Communications Manager 5.0
Configuration — System
NN40170-501 02.04 Standard
September 2009
Copyright © 2009, Nortel Networks
Procedure steps
Step Action
1
Click Configuration > Resources > Dial Up Interfaces.
2 On the Dial-out Interfaces tab, select the interface to connect.
3 Select the Enable check box.
4 In the IP Address Specification tab, specify the remote IP address to
which to connect.
5 In the top panel, click Connect.
--End--
Disconnecting a modem interface
Use the following procedure to disconnect a modem interface.
Procedure steps
Step Action
1
Click Configuration > Resources > Dial Up Interfaces.
2 On the Dial-out Interfaces tab, select the interface to disconnect.
3 Click Disconnect.
A confirmation dialog box will appear.
4 Click Yes.
--End--
Modem dial-out link parameters configuration
This section provides information about configuring dial-out parameters for
modem links.
Modem dial-out link parameters configuration navigation
• Configuring modem link parameters (page 100)
• Configuring the modem IP address specifications (page 102)
Configuring modem link parameters
Use the following procedure to configure the link parameters for the modem.
Comentarios a estos manuales