Avaya Configuring Dial Services Manual de usuario Pagina 302

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 326
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 301
Configuring Dial Services
A-22 114062 Rev. A
Outgoing Phone List
From the Primary Circuit Definition window, click on Phone Out to access the
Outgoing Phone List window.
Path: Outgoing Phone List window > Phone Number window
Caller Resolution Table Configuration
Router 1, the master router, does not require a caller resolution table. It initiates
calls to Router 2, it does not receive them. Consequently, Router 1 does not need
to verify the identity of Router 2. In contrast, Router 1 must have a CHAP name
and secret that it places in the call setup message to identify itself to Router 2.
Router 2, the slave router, does require a table entry. Router 2 receives calls from
Router 1 and must identify the incoming caller. After configuring the backup
circuits, you can configure the caller resolution table. Select Dialup > Caller
Resolution Table.
Path: Caller Resolution Table > Caller Name and Secret/Password window
Table A-30. Outgoing Phone List Parameters
Parameter Name
Router 1
(S131)
Router 2
(S12)
Phone Number 4363333
(Do not use hyphens or other
non-numeric characters.)
4364444
(Do not use hyphens or other
non-numeric characters.)
Note: The ISDN Numbering Plan and ISDN Numbering Type parameters
default to the correct settings based on the switch type you configured. Do
not change these parameters unless you receive explicit instructions from
your service provider.
Vista de pagina 301
1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 325 326

Comentarios a estos manuales

Sin comentarios