
Configuring Dial Services
7-46 114062 Rev. A
Parameter: Pool Channel Priority
Default: 1
Range: 1 to 50
Function: Prioritizes a group of lines in the same pool. For example, the router uses
a line of priority 1 before it uses a line of priority 2.
For dial backup and bandwidth-on-demand pools, lines can reside across
slots, but when you set this parameter, it affects only lines on the same
slot. In the case of dial backup, if you have two lines in Slot 3 and three
lines in Slot 4, the router sets a priority between the lines in Slot 3, then
sets a priority between the lines in Slot 4. For bandwidth-on-demand, the
router prioritizes lines in the preferred slot, then the reserved, and finally
the local slot.
Instructions: Assign a number to each pool. The lower the number, the higher the
priority. Note that if you have a pool that combines Raise DTR/V.25bis
lines with ISDN lines, you should coordinate the priority assignments for
this interface with those you set via the Priority parameter for the
Raise DTR/V.25bis interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.11.1.6
Comentarios a estos manuales