Avaya Configuring Dial Services Manual de usuario Pagina 251

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 326
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 250
Configuring Bandwidth-on-Demand Circuits
114062 Rev. A
10-17
Parameter: Maximum Links
Default: 4
Range: 1 to 30
Function: Specifies the maximum number of links (both leased and dial-up lines)
allowed in the multilink bundle for this circuit at any one time.
Instructions: Enter the maximum number of links that you want in the bundle.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.58
Parameter: BOD Recovery Threshold
Default: 50 percent
Range: 10 to 100 percent
Function: Specifies a percentage of the maximum amount of data that the router
transmits and receives. The actual flow of data traffic must fall below this
percentage before the router returns to the leased line or bundle
exclusively.
Instructions: Enter a percentage that the router should reach before it returns to the
leased line or bundle.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.59
Parameter: BOD Periods to Recover
Default: 10
Range: 1 to 100
Function: Specifies the number of consecutive times the router checks the
bandwidth circuit and determines that data traffic is below the configured
congestion threshold, thereby concluding that the line is no longer
congested. The router returns to the leased line or bundle exclusively.
Instructions: Enter the number of times the router should check if there is no longer a
congestion condition before bringing down the secondary line.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.60
Vista de pagina 250
1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 325 326

Comentarios a estos manuales

Sin comentarios