Avaya Configuring Dial Services Manual de usuario Pagina 137

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 326
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 136
Creating Line Pools
114062 Rev. A 7-39
5.
Accept the default values or enter new values for these fields, using the
descriptions following this procedure; then click on OK.
ISDN Switch Parameter Descriptions
Use the following descriptions when you configure the ISDN switch parameters.
Parameter: Switch Type
Default: BRI NET3
| PRI Net5
Options: BRI NET3
| BRI SWISSNET3 | BRI 5ESS | BRI DMS100 | BRI KDD |
BRI NTT | BRI TS013 | BRI NI1 | PRI 5ESS | PRI DMS100 | PRI 4ESS
| PRI KDD | PRI NTT | PRI Net5 | PRI TS014
Function: Specifies the type of ISDN switch to which you are connecting.
Instructions: Choose the appropriate ISDN switch. Refer to T
able 7-1 on page 40.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.6.1.3
Note: Once you select a switch, Site Manager bypasses the ISDN Switch
Configuration window for subsequent ISDN lines.
Note: Site Manager displays only those switch options for the interface you
are configuring. For example, if you are setting up a BRI interface, you will
see only the BRI switches when you click on Values. In addition, if you are
communicating with a Version 8.10 router, you will only see the BRI switches
supported for Version 8.10 software.
Vista de pagina 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 325 326

Comentarios a estos manuales

Sin comentarios