Avaya Configuring Dial Services Manual de usuario Pagina 136

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 326
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 135
Configuring Dial Services
7-38 114062 Rev. A
Creating Line Pools with ISDN Interfaces
At this point, the instructions for configuring line pools are the same for BRI and
PRI interfaces. To set up line pools:
1. Select either Dialup > Demand Pools, Backup Pools, or
Bandwidth-on-demand Pools from the Configuration Manager window.
Site Manager displays a Pools window similar to Figure
7-2 on page 7-4.
2. Click on Add.
Site Manager displays the Pool Configuration window (refer to Figure
7-3).
3. Enter a pool ID, referring to the parameter description on page 7-9, and
click on OK.
Site Manager shows the Lines Definition window, Figure
7-4 on page 7-5.
4. Click on a line to assign to it the pool. Do not select a previously
configured leased line.
For bandwidth-on-demand pools, you may select lines across a maximum of
three slots.
Site Manager then prompts you for the switch type by displaying the ISDN
Switch Configuration window (Figure 7-22).
Figure 7-22. ISDN Switch Configuration Window
Vista de pagina 135
1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 325 326

Comentarios a estos manuales

Sin comentarios