Avaya Configuring Dial Services Manual de usuario Pagina 289

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 326
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 288
Configuration Examples
114062 Rev. A A-9
Path: MCT1 or MCE1 Port Parameters window > PRI Timeslots window
Click on Select All in the PRI Timeslots window.
If you are using selective PRI service, that is, some B channels are blocked, the
timeslots that you configure as B channels should be the same channels assigned
by the switch provider. For example, if the provider gives you channels 1 to 10,
configure timeslots 1 to 10 as B Channels.
The PRI Logical Lines window automatically appears. Accept the default values.
Demand Pool Configuration
Configure the demand pool. Select Dialup > Demand Pools from the main menu
bar.
After entering a demand pool ID, the Demand Lines Definition window appears
automatically. Click on either the MCT1-2 connector (Router 1) or the ISDN1
connector (Router 2). Site Manager automatically displays the ISDN Switch
Configuration window.
Path: Demand Lines Definition window > ISDN Switch Configuration window
The ISDN Logical Lines window appears after the ISDN Switch Configuration
window. Accept the default values.
Table A-10. Demand Pools
Parameter Name
Router 1
(MCT1-2)
Router 2
(ISDN1)
Pool ID 1 1
Table A-11. Switch Configuration Parameters
Parameter Name
Router 1
(MCT1-2)
Router 2
(ISDN1)
Switch Type PRI 5ESS NI1
Vista de pagina 288
1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 325 326

Comentarios a estos manuales

Sin comentarios