
Creating Line Pools
114062 Rev. A 7-37
Site Manager returns you to the PRI Logical Lines window.
4. Accept the default MTU size or modify the parameter according to the
parameter description that follows.
Now that you have set the line parameters for the MCT1 or MCE1 lines, they can
become part of a line pool.
Logical Lines Parameter
Use the following description as a guideline when you configure the MTU Size.
Parameter: MTU Size (bytes)
Default: 1600 bytes
Range: 3 to 4608
Function: Specifies the Transmit/Receive buffer size, which determines the largest
frame that the router can transmit or receive across this port on the MCT1
Link Module. The router discards frames larger than the maximum
transfer unit.
Instructions: Enter the maximum transfer unit.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.6.1.55
Comentarios a estos manuales