
Configuring Dial Services
8-26 114062 Rev. A
Fill out the Caller Resolution Info Window as follows:
1. Enter values for the parameters according to the descriptions that follow.
2. Click on OK when you are finished.
You can specify additional caller names for a demand circuit group by selecting
Dialup > Caller Resolution Table, and entering the values for the Caller Name and
the Local Group parameters.
Caller Resolution Info Parameters
Use the following descriptions as guidelines when you configure the parameters in
the Caller Resolution Info window.
Parameter: Caller Name
Default: None
Options: Any text string; maximum 20 characters
Function: This name is part of the incoming call and it informs the local router of
the remote router’s identity.
Instructions: Enter a text string no longer than 20 characters that identifies a remote
router. If you configure CHAP as the authentication protocol, you must
enter a CHAP name for this parameter. If you configure PAP as the
authentication protocol, you must enter a PAP ID for this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.3.1.2
Comentarios a estos manuales