
Configuring Dial Services
A-12 114062 Rev. A
Path: Caller Name and Secret/Password > Local Circuit List window
The configured circuits are listed in the Local Circuit List window. Choose the
demand circuit you created earlier.
Local Phone Number Configuration
Finally, configure each router’s phone number. Select Dialup > Local Phone
Numbers. Site Manager displays the ISDN Local Phone Lines window.
Path: ISDN Local Phone Numbers > Phone Number window
Dial Backup with PPP on the Primary Line
Figure A-3 shows Routers 1 and 2 connected via a synchronous line running PPP.
You designate this synchronous connection as a primary connection, so if it fails,
the router provides a dial backup connection.
Table A-17. Local Phone Number Parameters
Parameter
Router 1
(MCT1-2)
Router 2
(ISDN1)
Directory Number 4366666 4364444
SPID N/A 50843644440000
Note: No SPID is needed for a PRI line. A SPID is needed for a BRI line
using an NI1 switch.
Comentarios a estos manuales