Avaya Configuring Dial Services Manual de usuario Pagina 153

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 326
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 152
Creating Line Pools
114062 Rev. A 7-55
Parameter: BRI T4 Timer
Default: 750 milliseconds
Range: 500 to 1000 milliseconds
Function: Indicates the amount of time the router waits for the line to recover from a
deactivated state. This timer prevents brief, minor disturbances on a noisy
line from forcing the router to deactivate the circuit. Instead, the router
waits to see if the line recovers within the T4 timer period. This enables
the router to suppress minor line problems from the upper-layer protocols.
Instructions: Enter a time limit that the router waits for the line to come back up before
deactivating the circuit. If your line is particularly noisy, enter the
maximum time for the router to wait for the line to reactivate.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.9.1.15
Modifying Line Pool Configurations
The sections that follow provide instructions for modifying your line pool
configuration.
Changing Pool IDs and Lines
Before you can delete or change a pool ID, you must first delete all circuits
associated with that pool. Refer to Chapter 8 for instructions.
To delete or change any line pool:
1. Select Dialup > Demand, Backup, or Bandwidth-on-Demand Pools from
the Configuration Manager window.
Site Manager displays the Pools window (refer to Figure
7-24).
To change a pool ID, highlight the ID entry in the Pools window. Enter
the new pool ID in the Pool ID parameter and click on Apply. The new
pool ID appears in the Pools window.
To delete a line pool, highlight the ID in the Pools window and click on
Delete. The pool is deleted from the router.
2. Click on Done in the Pools window when you finish modifying pool IDs.
Vista de pagina 152
1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 325 326

Comentarios a estos manuales

Sin comentarios