Avaya Configuring Dial Services Manual de usuario Pagina 121

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 326
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 120
Creating Line Pools
114062 Rev. A 7-23
MCT1/MCE1 Clock Parameters
Use the following descriptions when you configure the clock parameters.
Parameter: Primary Clock
Default: Port 1 Ext Loop
Options: Internal
| Port 1 Ext Loop | Port 2 Ext Loop | Auxiliary Ext
Function: Identifies the primary source of the timing signals, as follows:
Instructions: Specify the source of the primary transmit clock.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.1.1.4
Parameter: Secondary Clock
Default: Internal
Options: Internal
| Port 1 Ext Loop | Port 2 Ext Loop | Auxiliary Ext
Function: Identifies the secondary source of the timing signals, as follows:
The router uses the secondary clock only when the primary clock
becomes unavailable.
Instructions: Specify the source of the secondary transmit clock.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.1.1.5
Internal Uses the clock chip on the link module
Port 1 Ext Loop Uses the signal coming in from Port 1
Port 2 Ext Loop Uses the signal coming in from Port 2
Auxiliary Ext Uses an external source via the BNC connector
Internal Uses the clock chip on the link module
Port 1 Ext Loop Uses the signal coming in from Port 1
Port 2 Ext Loop Uses the signal coming in from Port 2
Auxiliary Ext Uses an external source via the BNC connector
Vista de pagina 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 325 326

Comentarios a estos manuales

Sin comentarios