
Configuration Examples
114062 Rev. A A-3
Configuration of Routers 4 and 7
Configure Routers 4 and 7 as follows:
1. Select a synchronous link module.
2. From the Configuration Manager window, click on a COM connector.
3. Follow the path of configuration windows that follow and set the
parameters according to Tables
A-1 through A-7.
Demand Pool Configuration
First, configure the demand pool. Select Dialup > Demand Pools from the main
menu bar.
After entering a demand pool ID, the Demand Lines Definition window appears.
Click on an available COM connector. Site Manager displays the WAN Serial
Interface Type window, where you determine whether you want to use Sync or
Async communication. Sync is the default, so no changes are needed.
Next, Site Manager displays the Line Media Type window.
Path: Demand Lines Definition window > Line Media Type window
Note: The tables list only parameters whose default settings change.
Table A-1. Demand Pool Parameters
Parameter Name
Router 4
(S25)
Router 7
(S23)
Pool ID 1 1
Comentarios a estos manuales