Avaya 1000 Series Video Conferencing Systems Guía de usuario descargar pdf (Pagina 57)

Avaya Video Conferencing Manager Deployment Guide 57

Sending a Message to a Device

You can send a message to a managed video communications device to appear in the

display connected to the device. The message appears in a dialog box with an OK button for

users to acknowledge and close the message.

Note: This feature is available only for managed Avaya, LifeSize, Polycom, and Tandberg

video communications systems. If not acknowledged, the message closes after 10

seconds on Avaya and LifeSize video communications systems only.

To send a message, follow these steps:

1. Access the Devices page.

2. On the Display list, click Managed: all.

3. Locate the entry for the device to which you wish to send a message and click the Show

message on device icon in the far-right column.

Note: This icon is also available on the upper-right corner of the Device details page.

Refer to “Viewing and Editing Device Details” on page 51 for information about

accessing the Device details page.

4. Enter a message in the Enter the message text box. Only ASCII characters are

allowed. The maximum number of characters allowed depends on the device’s make as

follows:

- Avaya: 200

- LifeSize: 200

- Polycom: 100

- Tandberg: 40

5. Click Send message.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 126 127

Sin comentarios

Avaya 1000 Series Video Conferencing Systems Guía de usuario Pagina 57