Avaya Configuring IP Services Manual de usuario Pagina 95

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 415
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 94
Customizing IP Services
114065 Rev. A 3-31
Enabling Proxy ARP on an Interface
Proxy ARP allows a router to answer a local ARP request for a remote
destination. For example, in Figure 3-5, Hosts B and C are located on the same
network but on separate subnetworks. Hosts B and C do not understand
subnetworking. The router connecting the two physical networks knows which
host resides on which network. The address mask is 255.255.255.000. In this
example, one subnet is a remote network with respect to the other subnet.
Figure 3-5. Proxy ARP Example
Host B wants to talk to Host C, so Host B broadcasts an ARP request, which asks
IP address 140.250.250.2 to respond with its physical address. The router captures
Host B’s ARP request and responds with its hardware address 00 00 A2 00 00 01
and Host C’s IP address 140.250.250.2. Host B maps Host C’s IP address
140.250.250.2 to the router’s hardware address 00 00 A2 00 00 01.
By default, Proxy ARP is disabled on the interface. You can use Site Manager to
enable Proxy ARP.
140.250.250.0140.250.200.0
140.250.250.2140.250.200.2
140.250.200.1
00 002 00 00 01
140.250.200.1
00 002 00 00 01
2140.250.250.32140.250.250.3
00 002 00 10 600 002 00 10 30
Router
Host
C
Host
A
Host
A
Host
B
IP0011A
Vista de pagina 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 414 415

Comentarios a estos manuales

Sin comentarios