Avaya Configuring IP Services Manual de usuario Pagina 94

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 415
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 93
Configuring IP Services
3-30 114065 Rev. A
By default, ARP is enabled on the interface. Use Site Manager to specify any of
the following supported address resolution schemes.
Selecting an Encapsulation Option for ARP and Probe
If you select ARP, Probe, or ARP/Probe, you must also select the appropriate
datalink encapsulation option.
If your address-resolution scheme is ARP only, select Ethernet encapsulation,
SNAP encapsulation, or Ethernet/SNAP encapsulation.
If your resolution scheme is HP Probe only, select LSAP encapsulation.
If your resolution scheme is ARP/Probe, select Ethernet/LSAP encapsulation,
SNAP/LSAP encapsulation, or Ethernet/SNAP/LSAP encapsulation.
By default, IP uses ARP Ethernet encapsulation. You can use Site Manager to
specify an encapsulation scheme.
IP ignores this parameter if the underlying medium is anything other than
Ethernet.
Site Manager: Address Resolution parameter: page A-27
Site Manager: Enet Arp Encaps parameter: page A-31
Vista de pagina 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 414 415

Comentarios a estos manuales

Sin comentarios