
Site Manager Parameters
114065 Rev. A A-47
Static Route Parameters
Parameter: IP Accounting Checkpoint Flagt
Path: Configuration Manager > Protocols > IP > Global
Default: 0
Options: 0 to 0x7FFFFFFF
Function: Allows you to specify when IP Accounting takes a snapshot of the active table
iand puts it in the checkpoint table.
Instructions: Specify a flag value that meets the requirements of IP Accounting on this
router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.20.1.1#7
Parameter: Enable
Path: Configuration Manager > Protocols > IP > Static Routes
Default: This parameter defaults to Enable when you configure the static route.
Options: Enable
| Disable
Function: Specifies the state (active or inactive) of the static route record in the IP
routing tables.
Instructions: Select Disable to make the static route record inactive in the IP routing table;
the IP router will not consider this static route. Select Enable to make the
static route record active again in the IP routing table.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.2
Comentarios a estos manuales