Avaya Configuring IP Services Manual de usuario Pagina 90

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 415
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 89
Configuring IP Services
3-26 114065 Rev. A
You can use Site Manager to control the number of destinations that are cached in
the forwarding table on this receiving interface.
Configuring an Interface for an ATM Logical IP Subnet
RFC 1577, “Classical IP and ARP over ATM.” is a specification for an
administrative entity within an ATM network called a logical IP subnet (LIS). Bay
Networks supports RFC 1577. For information on configuring IP interfaces on an
ATM LIS, see Configuring ATM Services.
Using Site Manager, you can
Specify whether the router is running as an ATM client or server on this
interface. You must configure one ATMARP server for each logical IP subnet
you define.
Define the ATM address network prefix of the ATMARP server on your
network. A complete ATM address consists of a network prefix and a user
part.
Define the user part (suffix) of the ATM address for the ATMARP server on
your network. The user part suffix consists of a 6-byte endstation identifier
and a 1-byte selector field.
Specify (for a client) the interval between registration refreshes.
Specify (for a server) the duration for which the registration is valid.
Site Manager: Max Forwarding Table Size parameter: page A-35
Site Manager: ATM ARP Mode parameter: page A-37
Site Manager: ARP Server ATM Address Network Prefix parameter: page A-37
Site Manager: ARP Server ATM Address User Part parameter: page A-38
Site Manager: Registration Refresh Interval parameter: page A-38
Vista de pagina 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 414 415

Comentarios a estos manuales

Sin comentarios