Avaya Configuring IP Services Manual de usuario Pagina 267

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 415
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 266
Site Manager Parameters
114065 Rev. A A-51
Adjacent Host Parameters
Parameter: Enable
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: Enable
Options: Enable
| Disable
Function: Specifies the state (active or inactive) of the adjacent host in the IP routing
tables.
Instructions: Select Disable to make the adjacent host record inactive in the IP routing table;
the IP router will not consider this adjacent host. Select Enable to make the
adjacent host record active again in the IP routing table.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.2
Parameter: IP Adjacent Host Address
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: None
Options: Any valid IP address
Function: Specifies the IP address of the device for which you want to configure an
adjacent host.
Instructions: Enter the IP address in dotted decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.3
Parameter: Next Hop Interface Addr
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: 0.0.0.0
Options: A valid IP address
Function: Specifies the IP address of the router’s network interface to the adjacent host.
Instructions: Enter the IP address in dotted decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.4
Vista de pagina 266
1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 414 415

Comentarios a estos manuales

Sin comentarios