Avaya Configuring IP Services Manual de usuario Pagina 244

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 415
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 243
Configuring IP Services
A-28 114065 Rev. A
Parameter: Proxy
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Off
Options: On
| Off
Function: Specifies whether this interface uses Proxy ARP to respond to ARPs for a
remote network.
Instructions: Select On to enable Proxy ARP on this interface. In order to enable Proxy ARP,
you must have set the ARP parameter to Enable for this interface. When you
enable Proxy ARP, the IP router assumes responsibility for IP datagrams
destined for the remote network. To enable Proxy ARP for subnets reachable via
a default route, also set the Enable Default Route for Subnets parameter to
Enable. To enable Proxy ARP for remote destinations on other networks, set the
Nonlocal ARP Destination parameter to Accept. Select Off to disable Proxy
ARP on this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.14
Parameter: Host Cache
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Off
Options: Off
| 120 | 180 | 240 | 300 | 600 | 900 | 1200 (seconds)
Function: Specifies whether the IP router times out entries in the address-resolution cache
for this interface, and specifies the timeout interval in seconds if the interface
does time out entries. The address-resolution cache contains host physical
addresses learned by means of ARP or Proxy ARP. A host entry is timed out
(deleted) if the IP router sends no traffic destined for that host within the
specified timeout period.
Instructions: Select Off to disable timeout on this interface; the IP router does not time out
address-resolution cache entries. Select one of the other options to enable
timeout with a timeout interval equal to the value you select (for example, 120
seconds); the IP router removes address-resolution cache entries that have not
been accessed within the specified number of seconds. Once an entry is
removed, the IP router must use ARP to re-acquire the physical-level address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.15
Vista de pagina 243
1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 414 415

Comentarios a estos manuales

Sin comentarios