Avaya Configuring IP Services Manual de usuario Pagina 127

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 415
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 126
Customizing RIP Services
114065 Rev. A 4-9
Configuring a RIP Interface for Dial-Optimized Routing
Dial-optimized routing is a method of reducing costs on dialed lines. Under
dial-optimized routing, RIP exchanges routing information on the interface only
when the router or a peer has activated the connection for a data transmission. RIP
does not initiate a connection on a dialed line solely for the purpose of issuing a
routing update.
For information on enabling dial-optimized routing, see Configuring Dial
Services.
Once you have enabled dial-optimized routing, you can use Site Manager to set
various RIP timers to control the way RIP generates updates on interfaces to
dialed lines. For information on setting timers for dial-optimized routing, see
“Setting RIP Timers on an Interface” on page 4-9.
Setting RIP Timers on an Interface
Configurable timers determine the way RIP manages route information on an
interface. Setting these timers allows you to specify
The frequency at which RIP broadcasts full RIP updates on the interface
The timeout period that RIP will wait before considering a network
unreachable
The holddown period that unreachable routes will be retained in the routing
table and advertised
Specifying an Update Interval
By default, RIP generates a full update every 30 seconds on each interface
configured with RIP.
If you have enabled dial optimized routing on this interface, the default is 1 hour.
You can use Site Manager to specify an update interval for the interface.
Site Manager: Broadcast Timer parameter: page A-97
Vista de pagina 126
1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 414 415

Comentarios a estos manuales

Sin comentarios