
Configuring IP Services
A-80 114065 Rev. A
Parameter: Transit Delay
Path: Configuration Manager > Protocols > IP > OSPF > Interfaces
Default: 1 second
Options: 1 to 3600 seconds
Function: Indicates the estimated number of seconds it takes to route a packet over this
interface.
Instructions: Either accept the default value of 1 second or enter some slightly higher
number for slower-speed serial lines, for example, 15 to 20 seconds for a
19.8-KB line.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.9
Parameter: Retransmit Interval
Path: Configuration Manager > Protocols > IP > OSPF > Interfaces
Default: 5 seconds
Options: 1 to 3600 seconds
Function: Indicates the number of seconds between link-state advertisement
retransmissions for adjacencies belonging to this interface. This value is also
used when retransmitting OSPF packets. Although the default value is 5, we
suggest the following values for this parameter: for broadcast, 5 seconds; for
point-to-point, 10 seconds; for NBMA, 10 seconds; for point-to-multipoint, 10
seconds.
Instructions: Either accept the default value of 5 seconds or set the retransmit interval to
some slightly higher number for slower-speed serial lines.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.10
Comentarios a estos manuales