
Import and Export Route Filters
114065 Rev. A C-23
Parameter: Action
Path: Configuration Manager > Protocols > IP > Route Filters > EGP > Import Filters
Default: Accept
Options: Accept
| Ignore
Function: Specifies whether the route is transferred to the routing tables. If you select
Accept (default), the routing information is sent to the routing tables. If you
select Ignore, the routing information is dropped.
Instructions: Either accept the default, Accept, or select Ignore.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.12.1.5
Parameter: Preference
Path: Configuration Manager > Protocols > IP > Route Filters > EGP > Import
Filters
Default: 1
Options: 1 to 15
Function: Assigns a weighted precedence value to a route included in the routing tables.
If confronted with multiple routes to the same destination, the router, by
default, grants preference to routes in the following order: direct, OSPF
internal, static, BGP-3, OSPF external, and RIP. If this hierarchy is acceptable,
accept the default value 1 for preference. If you want to grant preference to this
OSPF-derived route, assign a new preference value in the range of 1 to 15 (the
greater the number, the higher the preference).
Instructions: Either accept the default value 1, or enter a new value. Routes for all networks
(0.0.0.0/0.0.0.0) should have the lowest preference. Routes for the most
specific networks (longest address and mask) should have the highest
preference.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.12.1.6
Comentarios a estos manuales