
Import and Export Route Filters
114065 Rev. A C-13
BGP-3
BGP-3 Import Filters
Parameter: Import Address
Path: Configuration Manager > Protocols > IP > Route Filters > BGP3 > Import
Filters
Default: 0.0.0.0
Options: Any IP network address
Function: Identifies, by IP address, the network to which this filter applies.
Instructions: Enter the appropriate network address in dotted decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.14.1.3
Parameter: Import Mask
Path: Configuration Manager > Protocols > IP > Route Filters > BGP3 > Import
Filters
Default: 0.0.0.0
Options: Depends on the address class of the network address
Function: Specifies the range of addresses upon which this filter acts.
Instructions: For example, consider Class B Network 172.32.0.0, which allocates the upper
8 bits of the host identification field to the Subnet ID, and the final 8 bits to the
Host ID. The address mask directs the filtering process to a specific portion of
the IP address. In other words, any IP address that matches the masked portion
of 172.32.0.0 is subject to filtering. If you enter 255.255.0.0 for this parameter,
only the Net ID portion of the address will be filtered. If you enter the mask
255.255.255.0, the net ID and subnet ID portions of the address will be filtered.
If you set the Import Address field to 0.0.0.0 and set this parameter to 0.0.0.0,
then the filter applies to all routes. If you set the Import Address field to 0.0.0.0
and set this parameter to 255.255.255.255, then the filter applies to the default
route. Enter the appropriate mask in dotted decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.14.1.4
Comentarios a estos manuales