Avaya Configuring IP Services Manual de usuario Pagina 52

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 415
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 51
Configuring IP Services
2-6 114065 Rev. A
Deleting RIP from An IP Interface
To delete RIP from an interface on which it is currently configured, begin at the
Configuration Manager window and proceed as follows:
1. Click on the connector from which you want to delete RIP services.
2. Click on Edit Circuit.
3. Select Protocols > Add or Delete.
The Select Protocols window opens. The RIP button is highlighted to show
that RIP is enabled on the IP interface.
4. Click on RIP to delete it.
5. Click on OK to exit the window.
6. Select File > Exit to exit the Circuit Definition window and return to the
Configuration Manager window.
Customizing RIP
The instructions in this chapter show you how to start RIP using all default values
and settings.
For information on modifying RIP defaults, see Chapter 4.
Vista de pagina 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 414 415

Comentarios a estos manuales

Sin comentarios