
Configuring IP Services
2-8 114065 Rev. A
Adding OSPF to an IP Interface
To add OSPF to an IP interface, begin at the Configuration Manager window and
proceed as follows:
1. Click on the connector to which you want to add OSPF services.
2. Click on Edit Circuit.
3. Select Protocols > Add or Delete.
The Select Protocols window opens.
4. Click on OSPF to select it.
5. Click on OK to exit the window.
6. Select File > Exit to exit the Circuit Definition window and return to the
Configuration Manager window.
Deleting OSPF from an IP Interface
To delete OSPF from an interface on which it is currently configured, begin at the
Configuration Manager window and proceed as follows:
1. Click on the connector from which you want to delete OSPF services.
2. Click on Edit Circuit.
3. Select Protocols > Add or Delete.
The Select Protocols window opens. The OSPF button is highlighted to show
that OSPF is enabled on the circuit.
4. Click on OSPF to delete it.
5. Select File > Exit to exit the Circuit Definition window and return to the
Configuration Manager window.
Customizing OSPF
The instructions in this chapter show you how to start OSPF using all default
values and settings.
For information on modifying OSPF defaults, see Chapter 5.
Comentarios a estos manuales