Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 97

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 176
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 96
117362-C Rev 00
4-1
Chapter 4
Customizing BootP
This chapter describes how to customize BootP services. It assumes you have
configured an IP interface and enabled BootP on this interface using the default
parameters, as described in Chapter 1, and that you understand the BootP
concepts in Chapter 2.
You can enable BootP services most easily by accepting all the default
configuration parameter values. However, you may want to change these values,
depending on your network requirements. This chapter describes choices you can
make to use BootP most effectively on your network.
Topic Page
Customizing BootP Relay Agent Parameters 4-2
Setting Up the Routing Path Between the BootP Server and the Routers 4-5
Specifying Interfaces to Receive and Relay BOOTREQUEST Packets 4-7
Configuring an AN to Use EZ Install over a Frame Relay PVC 4-11
Specifying Servers for BootP Services 4-13
Deleting the BootP Relay Agent from an IP Interface 4-18
Deleting BootP Globally 4-18
Vista de pagina 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 175 176

Comentarios a estos manuales

Sin comentarios