Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario descargar pdf (Pagina 82)

Configuring SNMP, BootP, DHCP, and RARP Services

3-22

117362-C Rev 00

Disabling a Trap Entity

You can prevent the SMNP agent from sending a specific trap entity to a network

management station regardless of slot by disabling the trap entity.

Using the BCC

Trap entities are enabled by default. To prevent the SMNP agent from sending a

specific trap entity to a network management station regardless of slot, enter the

following command at the trap entity-specific prompt:

disable

4. Choose

Trap Configuration

. The Trap Configuration menu opens.

5. Choose

Interfaces

. The Trap Configuration window opens.

6. Select the slot for which you want to

configure traps by clicking on the bar in the

slot box.

7. Select the severity level at which you want

to receive traps by clicking on the Events

box at the bottom of the window. For a

description of severity levels, see Chapter

8. Click on

Update

. The entity name moves to the Current

Entities column, indicating that you want

to receive traps for this entity at the

severity level you specified.

(To move an entity from the column,

select the entity name and then click on

Remove

9. Repeat steps 6 through 8 for other slots

you want to configure.

10. Click on

Save

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 175 176

Sin comentarios

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 82