Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario descargar pdf (Pagina 153)

SNMP, BootP, DHCP, and RARP Parameter Descriptions

117362-C Rev 00

A-17

Parameter: Timeout Secs.

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table

Default: 0 (seconds)

Options: 0 to 65535 (seconds)

Function: Specifies the minimum number of seconds that the router waits before

forwarding a BOOTREQUEST packet. If the value in the seconds field of a

BOOTREQUEST packet is less than the value you specify for this parameter,

the router drops the packet.

Instructions: Accept the default, 0, or specify a number from 1 to 65535.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.6

Parameter: Pass Through Mode

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table

Default: BOOTP

Options: BOOTP

DHCP

BOOTP and DHCP

Function: Specifies whether the interface relays BootP, DHCP, or both BootP and DHCP

requests.

Instructions: Select BOOTP to relay BootP requests. Select DHCP to relay DHCP requests.

Select BOOTP and DHCP to relay both kinds of requests.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.16

Parameter: Interface Priority

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table

Default: 0

Options: 0 to 16

Function: Indicates priority of the interface on a multinetted interface.

Instructions: Enter a integer from 1 to 16 to indicate the priority of the interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.20

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 175 176

Sin comentarios

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 153