Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario descargar pdf (Pagina 133)

Customizing RARP

117362-C Rev 00

7-3

Defining the RARP Mapping Table

The RARP mapping table lists the clients on the network that use the router’s

RARP services. You define the router’s MAC address-to-IP address RARP

mapping table by specifying the MAC addresses of clients and the corresponding

IP addresses that the RARP server assigns to those clients.

Specifying the Client’s MAC Address

You must specify the MAC address of each client that will use the RARP services

of this router. The client will include the MAC address you specify here in RARP

broadcasts to the router.

To specify the client’s MAC address, complete the tasks in the following table.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

Reverse ARP

. The Reverse ARP menu opens.

4. Choose

Map Table

. The RARP Map Table window opens.

5. Click on

Add

. The RARP Addresses window opens.

6. Set the

MAC Address

parameter. Click on

Help

or see the parameter description on

page A-28.

7. Click on

. You return to the Configuration Manager

window.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 175 176

Sin comentarios

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 133