Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario descargar pdf (Pagina 161)

SNMP, BootP, DHCP, and RARP Parameter Descriptions

117362-C Rev 00

A-25

Parameter: Number of Pings

Path: Configuration Manager > Protocols > Global Protocols> DHCP Global

Default: 1

Options: 1 to 9999

Function: The number of ping attempts that the DHCP server makes to the IP address of

the prospective DHCP client to detect possible conflicts before declaring the

client address unavailable.

Instructions: Accept the default, 1, or specify a number from 1 to 9999 to determine the

number of ping attempts that the DCHP server makes to the prospective DHCP

client. Normally, a DHCP server makes only one ping attempt.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.24.1.1.5

Parameter: Ping Timeout

Path: Configuration Manager > Protocols > Global Protocols> DHCP Global

Default: 750

Options: 1 to 5000

Function: Specifies the amount of time (in milliseconds) that the DHCP server waits for a

conflict detection ping to time out.

Instructions: Accept the default, 750 milliseconds, or specify a value from 1 to 5000. Typical

DHCP clients retransmit a DHCPDISCOVER message after two seconds. Thus,

if you specify a value greater than 2000 (that is, 2 seconds), the router may

transmit spurious messages. The same condition applies if you set the value of

the ping timeout and the number of pings so that their product (timeout value

times the number of pings) is greater than 2000.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.24.1.1.6

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 175 176

Sin comentarios

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 161