Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 164

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 176
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 163
Configuring SNMP, BootP, DHCP, and RARP Services
A-28
117362-C Rev 00
RARP Interface Parameters
Use the following guidelines to configure RARP interface parameters in the
RARP Interface Table window.
RARP Address Parameters
Use the following guidelines to configure RARP address parameters in the RARP
Addresses window.
Parameter: Enable/Disable
Path: Configuration Manager > Protocols > IP > Reverse ARP > Interface Table
Default: Enable
Options: Enable
|
Disable
Function: Reenable or disable the RARP interface you selected from the list of interfaces.
Instructions: Select Enable to reenable a disabled interface. Select Disable to disable an
interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.9.3.1.2
Parameter: MAC Address
Path: Configuration Manager > Protocols > IP > Reverse ARP > Map Table >
Add
Default: None
Options: Any valid MAC address
Function: Specifies the MAC address of a client that will use the RARP services of this
router.
Instructions: Enter the MAC address of a client.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.9.2.1.2
Vista de pagina 163
1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 175 176

Comentarios a estos manuales

Sin comentarios