Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario descargar pdf (Pagina 117)

Customizing BootP/DHCP Relay

117362-C Rev 00

5-3

Defining DHCP Servers

If DHCP clients obtain IP addresses and other configuration information from a

DHCP server on a different subnet, connected through a router, then you must

define a DHCP preferred server by specifying the IP address of the BootP relay

agent on the local router and the IP address of the target server. The router can

then unicast a BOOTREQUEST packet through normal IP services to that server.

For instructions, see “Specifying Servers for BootP Services” on page 4-13.

To allow DHCP operation, be sure to set the Pass Through Mode parameter in the

BOOTP Relay Agent Preferred Server Table window to DHCP.

To define a preferred DHCP server, complete the tasks in the following table.

5. Click on

Forward I/F

. The BOOTP Relay Agent Forwarding

Table window opens.

6. Select the address pair you want.

7. Set the

Pass Through Mode

parameter.

Click on

Help

or see the parameter

description on page A-23.

8. Click on

Apply

9. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens.

5. Click on

Pref Serv

. The BOOTP Relay Agent Preferred

Server Table opens.

(continued)

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 175 176

Comentarios a estos manuales

Sin comentarios

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 117

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services