Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 152

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 176
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 151
Configuring SNMP, BootP, DHCP, and RARP Services
A-16
117362-C Rev 00
BootP and DHCP Parameters
Use the following guidelines to configure BootP and DHCP parameters in the
BOOTP Relay Agent Interface Table window.
BootP Relay Agent Interface Parameters
Parameter: Enable/Disable
Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface
Table
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether BootP is active on the network interface.
Instructions: Select Enable to enable BootP on the network interface. Select Disable to
disable BootP on the network interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.2
Parameter: Hops
Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface
Table
Default: 4 (hops)
Options: 1 to 16 (hops)
Function: Specifies the maximum number of hops from the client to the server. A hop is
the logical distance between two devices. If the value in the hops field of a
BOOTREQUEST packet is greater than the number you specify for this
parameter, the router drops the packet.
Instructions: Accept the default of 4 hops or specify a number from 1 to 16.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.5
Vista de pagina 151
1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 175 176

Comentarios a estos manuales

Sin comentarios