Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 141

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 176
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 140
SNMP, BootP, DHCP, and RARP Parameter Descriptions
117362-C Rev 00
A-5
SNMP Community Parameters
Use the following guidelines to configure SNMP community parameters in the
SNMP Community window.
Parameter: Community Name
Path: Configuration Manager > Protocols > IP > SNMP > Communities >
Community > Add Community
|
Edit Community
Default: None
Options: Any string of printable ASCII characters, up to 63 characters in length,
including embedded spaces
Function: Specifies the name of the SNMP community.
Instructions: Enter the SNMP community name.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.5.2.1.3
Parameter: Access
Path: Configuration Manager > Protocols > IP > SNMP > Communities >
Community > Add Community
|
Edit Community
Default: Read Only
Options: Read Only
|
Read-Write
Function: Specifies the access privileges that the router grants to all members of this
SNMP community.
Instructions: Select Read Only to allow members of this community to only view
configuration and performance information about this router.
Select Read-Write to allow members of this community to not only view
configuration and performance information about this router, but also change
the routers configuration.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.5.2.1.4
Vista de pagina 140
1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 175 176

Comentarios a estos manuales

Sin comentarios