Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario descargar pdf (Pagina 80)

Configuring SNMP, BootP, DHCP, and RARP Services

3-20

117362-C Rev 00

For example, the following command line causes the SNMP agent to send to a

network management station a trap for the IP protocol (entity 2) on slot 2.

snmp# trap-entity entity 2 slot 2

trap-entity/2/2#

Using Site Manager

To specify a trap entity, complete the tasks in the following table

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

SNMP

. The SNMP menu opens.

4. Choose

Trap Configuration

. The Trap Configuration menu opens.

5. Choose

Interfaces

. The Trap Configuration window opens.

6. Select the slot for which you want to

configure traps by clicking on the bar in the

Slot box.

7. Select an entity for which you want to

configure traps. If you want to configure

traps for all entities running on a slot,

choose

All Entities

from the top of the

column.

The entity names appear in the Available

Entities column, a comprehensive list of

all protocols available, regardless of the

platform or software you are using.

8. Click on

Update

. The entity name moves to the Current

Entities column, indicating that you want

to receive traps for this entity at the

severity level you specified.

(To move an entity from the column,

select the entity name and then click on

Remove

9. Repeat steps 6 through 8 for other slots

you want to configure.

10. Click on

Save

. You return to the Configuration Manager

window.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 175 176

Comentarios a estos manuales

Sin comentarios

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 80

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services