Avaya Configuring Bridging Services Manual de usuario Pagina 96

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 95
Configuring Bridging Services
2-36 114060 Rev. A
Parameter: SR Bridge ID
Default: 0x0
Range: 0x1 to 0xf
Function: Specifies this bridge’s bridge ID and identifies the Bay Networks source
routing bridges in the network.
Instructions: Assign the same value to all Bay Networks source routing bridges in the
network (unless two bridges operate in parallel; see the following note).
The SR bridge ID must be unique among any other non-Bay Networks
bridge IDs in the network.
You cannot use the value 0x0 that appears initially in the parameter box.
You must specify a value for this parameter that is within the given range.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.1.5
Parameter: SR Bridge Group LAN ID
Default: 0xfff
Range: 0x1 to 0xfff
Function: Specifies this bridge’s group LAN ID. The bridge uses the group LAN ID
when transmitting specifically routed frames (SRFs) between Bay
Networks bridges. Together with the other routing designators, the group
LAN ID helps bridges manipulate the RIF.
Instructions: Assign the same group LAN ID to all Bay Networks source routing
bridges in the network. The group LAN ID must be unique among any
other group LAN IDs, ring IDs, or internal LAN IDs in the network.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.1.6
Note: If two Bay Networks source routing bridges operate in parallel, you
must assign a different SR bridge ID to one of them. You must also specify the
SR bridge ID in the Bridge Entry list for all other Bay Networks source routing
bridges in the network. (See “Implementation Notes” for more information.)
Vista de pagina 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 209 210

Comentarios a estos manuales

Sin comentarios