Avaya Configuring Bridging Services Manual de usuario Pagina 104

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 103
Configuring Bridging Services
2-44 114060 Rev. A
Parameter: Encapsulation Format
Default: Proprietary
Options: Proprietary
| Standard
Function: Indicates Bay Networks proprietary encapsulation format or standard
encapsulation format.
Instructions: If you want to run source routing over a Frame Relay network, follow
these instructions:
If your router, running software Version 8 or higher, communicates
with a third-party router that supports RFC 1490, and you configured
both routers to run source routing over Frame Relay, select Standard
for RFC 1490 standard Frame Relay encapsulation.
If your router, running software Version 8 or higher, communicates
with a Version 5 Bay Networks router, and you configured both
routers to run source routing over Frame Relay, accept the default,
Proprietary.
If your Version 8 router communicates with a Version 7 Bay
Networks router, and you configured both routers to run source
routing over Frame Relay, select Standard.
If your router, running software Version 8 or higher, communicates
with another Version 8 router, and you configured both routers to run
source routing over Frame Relay, you can select either Proprietary or
Standard; however, you must set the same encapsulation format for
both routers.
If you want to bridge between source routing Token Ring and FDDI
endstations, refer to the following instructions:
If your router, running software Version 8 or higher, connects Token
Ring endstations to FDDI endstations, select Standard for standard
native encapsulation.
If your router, running software Version 8 or higher, communicates
with a third-party router via an FDDI network, and each router
connects to a Token Ring network, select Standard.
If your router communicates with a Version 5 or Version 7 router via
an FDDI network, and each router connects to a Token Ring network,
accept the default, Proprietary.
If your router, running software Version 8 or higher, communicates
with another router running Version 8 or higher via an FDDI network,
Vista de pagina 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 209 210

Comentarios a estos manuales

Sin comentarios