
Using Source Routing Bridge Services
114060 Rev. A 2-47
Parameter: New Source Routing Bridge ID
Default: None
Range: 1 to 15
Function: Specifies the other active bridge IDs that exist on the network. This
parameter is only necessary if you have parallel source routing bridges
configured on your network.
Instructions: Enter the bridge ID assigned to the parallel bridge on your network. Refer
to “Assigning Bridge IDs, Internal LAN IDs, and Group LAN IDs
” for
details on parallel source routing bridges.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.3.1.1
Deleting a Bridge Entry from the Bridge Entry List
To delete a bridge ID:
1. Select Protocols > Source Routing > Bridge Entry in the Configuration
Manager window (refer to r
efer to Figure 2-17).
The Source Routing Bridge IDs window appears, which lists the other bridge
IDs currently configured on the network (refer to Figure
2-20).
2. Select a bridge ID from the list.
3. Click on Delete.
The bridge ID you deleted no longer appears in the Bridge Entry list.
4. Click on Done to exit the window. Site Manager returns you to the
Configuration Manager window.
Adding or Deleting an IP Address on the IP Explorer Address List
You specify an IP address on the IP Explorer Address list if you want to source
route across an IP network. The following sections describe how to add and delete
an IP address in the IP Explorer Address list.
Comentarios a estos manuales