Avaya Configuring Bridging Services Manual de usuario Pagina 53

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 52
Using Transparent Bridge Services
114060 Rev. A 1-27
If the values for Max Age, Hello Time, and Forward Delay are not the
same for each bridge in your network, the root bridge parameters rule the
entire topology.
Parameter: Max Age
Default: 20 seconds (expressed in hundredths of a second: 2000)
Range: 6 to 40 seconds
Function: Specifies the maximum number of seconds that the router considers
protocol information (BPDUs) valid. After this specified amount of time,
the router times out and discards the information.
We recommend that you accept the default value; however, if you change
it, you must follow the guidelines listed previously in this section.
Instructions: Either accept the default value or specify a new value. Make sure to
express any new value in hundredths of a second.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.2.1.15
Caution: We recommend that you not change the following three spanning
tree parameters (Max Age, Hello Time, and Forward Delay) unless absolutely
necessary. However, if you do change them, you must follow these guidelines:
2 x (Forward Delay – 1 Second) Max Age
Max Age 2 x (Hello Time + 1 Second)
BRG0010A
Vista de pagina 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 209 210

Comentarios a estos manuales

Sin comentarios