
Configuring Bridging Services
1-20 114060 Rev. A
1. Select Protocols > Bridge > Global from the Configuration Manager
window (r
efer to Figure 1-14).
The Edit Bridge Global Parameters window appears (Figure
1-15).
Figure 1-15. Edit Bridge Global Parameters Window
2.
Edit the parameters, using the descriptions in the next section as a guide.
3. Click on OK to save your changes and exit the window.
Site Manager returns you to the Configuration Manager window.
Bridge Global Parameter Descriptions
Use these parameter descriptions as a guide when you configure the parameters in
the Edit Bridge Global Parameters window (refer to Figure
1-15).
Parameter: Enable
Default: Enable
Options: Enable
| Disable
Function: Enables or disables bridging on the entire router.
Instructions: Set to Disable if you want to disable bridging for all circuits on the router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.1.1.2
Comentarios a estos manuales