Avaya Configuring Bridging Services Manual de usuario Pagina 167

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 166
Using Translation Bridge Services
114060 Rev. A 4-19
Parameter: Broadcast Conversion
Default: Enable
Options: Enable
| Disable
Function: If you enable this feature, when the translation bridge receives a frame
destined for the 802.3 broadcast address (0xFFFFFFFFFFFF), it converts
the address to the 802.5 broadcast address (0xC000FFFFFFFF), and vice
versa.
Instructions: Set to Disable if you do not want the translation bridge to convert the
broadcast address. When you disable this parameter, the translation bridge
sends broadcast frames with the 802.3 broadcast address
(0xFFFFFFFFFFFF) out the source route interfaces.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.11.7
Parameter: Ethernet Type
Default: Ethernet
Options: Ethernet
| IEEE8023
Function: Specifies the default type of frame to be sent to the transparently bridged
network, either Ethernet Version 2 (Ethernet) or Ethernet 802.3
(IEEE8023).
Instructions: Specify the frame type that will be used by most of the Ethernet
endstations on the network. (You can indicate specific addresses that use
the other Ethernet type. Refer to “Editing Translation Bridge Station
Type” later in this chapter.)
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.11.8
Vista de pagina 166
1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 209 210

Comentarios a estos manuales

Sin comentarios