Avaya Configuring Bridging Services Manual de usuario Pagina 183

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 182
Using Native Mode LAN Services
114060 Rev. A 5-9
Parameter: Disable
Default: Enabled
Options: Enabled
| Disabled
Function: Enables and disables the NML service on this circuit.
Instructions: Set to Disabled if you want to temporarily disable NML on this circuit
rather than delete it. Set to Enabled if you previously disabled NML but
now want to re-enable it.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.5.2.1.2
Parameter: Add Security Header
Default: Add Security
Options: No Security
| Add Security | Check Security
Function: Specifies whether the NML port adds a CUGID to frames entering the
bridge and performs an access check on frames that exit the bridge.
Add Security --The NML port adds a CUGID to every frame that enters
the bridge on the circuit and performs an access check on every frame that
attempts to exit from the bridge on the circuit. Depending on the option
you specify for the Security List Action parameter, the NML port
forwards or drops the exiting frame. In forwarding a frame, the NML port
strips off the CUGID.
Check Security -- The NML port performs an access check on each frame
that attempts to exit from the bridge on the circuit. Depending on the
option you specify for the Security List Action parameter, the NML port
forwards or drops the exiting frame. The NML port forwards the frame
with the CUGID in place. It does not strip off the identifier.
No Security -- The port performs no access validation.
Instructions: Specify Add Security for a circuit that provides a bridge connection for a
LAN belonging to a closed user group.
Specify Check Security for a circuit that provides a bridge connection for
a network trunk. For information about NML services for network trunks,
refer to “Controlling NML
Traffic on a Network Trunk.”
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.5.2.1.4
Vista de pagina 182
1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 209 210

Comentarios a estos manuales

Sin comentarios