
Using Source Routing Bridge Services
114060 Rev. A 2-35
Parameter: Enable
Default: Enable
Options: Enable
| Disable
Function: Enables or disables source routing on the entire router.
Instructions: Set to Disable if you want to disable source routing.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.1.2
Parameter: SR Bridge Internal LAN ID
Default: 0x0
Range: 0x1 to 0xffe
Function: Specifies this bridge’s internal LAN ID.
Instructions: Assign an internal LAN ID that is unique among all other internal LAN
IDs, group LAN IDs, and ring IDs in the network.
You cannot use the value 0x0 that appears initially in the parameter box.
You must specify a value for this parameter that is within the given range.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.1.4
Comentarios a estos manuales