Avaya Configuring Bridging Services Manual de usuario Pagina 117

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 116
Using Source Routing Bridge Services
114060 Rev. A 2-57
Source Route Spanning Tree Interface Parameter Descriptions
Use these parameter descriptions as a guide when you configure the parameters in
the Source Route Spanning Tree Interface List window (refer to refer to
Figure 2-25).
Parameter: Enable
Default: If you added spanning tree using either the Quick-Start procedure or the
configuring-circuits procedure, this parameter defaults to Enable. If you
previously used this parameter to disable spanning tree on this circuit, the
parameter defaults to Disable.
Options: Enable
| Disable
Function: Toggles spanning tree on and off for this circuit only.
This parameter does not allow you to add spanning tree to this circuit. To
add the spanning tree to this circuit, you must use the configuring-circuits
procedure. For instructions, see Configuring Routers.
Instructions: Set this parameter to either Enable or Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.2.1.25
Parameter: Path Cost
Default: 1
Range: 1 to 65535
Function: When this port is the root port, the path cost is the contribution of the path
through this port to the total cost of the path to the root for this bridge.
When this port is not the root port, the router adds the path cost to the
designated cost for the root port and uses it as the value of the root path
cost offered in all configuration BPDUs transmitted by the bridge.
To determine the path cost, use this formula:
Interface Path Cost = 1000/Attached LAN speed in Mb/s
Instructions: Enter a path cost value for this interface in the Path Cost box. For
example, enter 100 if the attached LAN is Ethernet (1000/10 = 100).
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.2.1.28
Vista de pagina 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 209 210

Comentarios a estos manuales

Sin comentarios