Avaya Configuring Bridging Services Manual de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
Configuring Bridging Services
1-4 114060 Rev. A
Figure 1-2. RFC 1042 Encapsulation
AppleTalk Address Resolution Protocol (ARP) frames (Ethernet frames with a
protocol type equal to 80F3) require special translation by the Bridge Tunnel
Service.
Figure 1-3 illustrates the LLC and SNAP headers of the AppleTalk ARP outbound
frame after the Bridge Tunnel Service translation.
Figure 1-3. Bridge Tunnel Service Encapsulation
The bridge translates all IEEE 802.2 LLC frames by removing the length field.
Protocols in this category include AppleTalk Phase 2, Novell Proprietary, and IP.
Figures 1-4 and 1-6 illustrate different LAN configurations and show how Bridge
A translates different types of frames originating on LAN 1 for transmission
across the FDDI LAN. Figure 1-5 shows how Bridge B translates frames
transmitted from the FDDI LAN to LAN 2.
SNAP LLC
DSAP SSAP Control OUI Protocol Type
0 xAA 0 xAA 03 000000 (Original Type)
BRG0002A
SNAP LLC
DSAP SSAP Control OUI Protocol Type
0 xAA 0 xAA 03 0000F8 80F3
BRG0027A
Key
SNAP =Subnetwork Access Protocol
LLC =logical link control
DSAP = destination service accesss point
SSAP = session service access point
OUI = organizationally unique identifier
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 209 210

Comentarios a estos manuales

Sin comentarios